Phase
1:
if your model has small side straps,
bows, other finishings or accessories
(Fig. A), these must be removed or unhooked.
Phase 2:
remove all the cushions, unfasten
the zips and remove the coverings (Fig. B).
Phase 3:
unfasten the zip positioned behind
the back, if present (Fig. C). Remove the
covering from the groove if the sofa has
feet positioned on the outside edge
(Fig. D).
Phase 4:
detach the Velcro, reverse the
covering along the sofa's outside edge
starting
from the corners and protect the
edge using the strip supplied (Fig. E).
Reverse the covering carefully to avoid
damaging the stitches. Repeat the same operations along the
covering's internal edge (Fig. F and G).
Phase 5:
carefully remove the covering
starting from the corners, proceeding
alternately for a few centimetres from one
side of the sofa to the other. Then remove
the covering completely from the sofa.
Warning
• Do not remove the protective strip:
this strip must be attached during
washing.
The strip must only be removed
after the sofa has been relined and
should be preserved carefully for
further washes.
|
